Honda Accord stalls after accelerating with the accelerator pedal

Q: A Honda Accord, due to lack of water, the engine cylinder gasket burned out. After replacing the cylinder gasket, the engine started normally, but the vehicle stalled after the accelerator pedal was pressed. For this reason, the throttle assembly, 4 spark plugs and 4 injectors were replaced, and the fault still exists. The driver said that everything was normal before the car “stallized”. What is the cause of the fault?

A: According to your description, the analysis is that simply replacing the cylinder gasket caused the engine to stall as soon as the gasket was refueled. If it is not due to incorrect timing installation, it is caused by the wrong insertion of the sensors. Especially when accelerating, it stalls. It is necessary to focus on checking the intake pressure sensor plug and re-inserting the plug correctly, which should restore the vehicle to normal.